Malibu Sew-Along // Day 1

Monday, May 04, 2015


I'm so thrilled that it is finally time to sew a Malibu Cross-Back dress together! This pattern is one of my personal favorites!!


First, head to your computer and print out your pattern. Here are a few tips I like to use for printing:
  • Print the instruction pages on two sides (front and back). For the Malibu pattern, these are pages 2-7. I like to save ink by not printing the pretty cover and inspiration pages (1, 9-11), but that’s up to you. You may even choose to not print the instruction at all and have your digital copy handy while you sew.
  • Print the pattern pages (12-25) on a single side only. Make sure your scaling is set to “none”. For views A & C you only need pattern pages 12-16. 
  • Above all, utilize the test squares to make sure your pattern has printed at the full scale.


Next, cut all pattern pieces of your desired size. Be sure to include the gray/shaded areas in your cuts.


Overlap the shaded areas, as indicated on the pattern pieces, and tape each piece together to form the full pattern pieces.

Now you are ready to cut into your pretty fabric! You’ll need to refer to the cutting diagram in the pattern for the layout based on the fabric type. For views A and C, refer to the cutting charts for the skirt panel dimensions. You will also need to cut 1.5" wide strips of bias tape. Refer to page 4 of the pattern for bias tape cutting instructions.


That's it for today!

See the rest of the Malibu Sew-Along here:

We’d love to see your progress!! Show us your photos in our Facebookgroup. You can also share photos on Facebook and Instagram tagged #malibusewalong.

5 comments:

  1. Anonymous11:10 AM

    Hi! Thanks for the sew-along. I have a question about adjusting the pattern. My girl is 8 years old but she is very skinny. Her height is about 120 cm but her chest widht is only 53 cm (about 21 inches). It says to cut the pattern according to the height of the child, but I'm afraid it is going to be to large at the upper body. What are your suggestions? Thanks for your help, Melanie.

    ReplyDelete
    Replies
    1. Melanie, glad you're joining us on the SAL. In your case, I would cut the size 4T bodice but extend the lines at the bottom to the 7 or 8/9 length. If you are doing the mini or maxi versions, you will be able to cut the skirt at the length you desire for a perfect fit. If you're doing the hi-low version, you can do as above and cut the 4T for width and 7 or 8/9 for length. Hope this helps.

      Delete
  2. Anonymous10:26 AM

    HI
    Thank you for this sew along experience. This is my first time sewing with knits! I have read that I will need a ball point needle ( got it!) , but dont know what stitch should i use. I am using a regular sewing machine. Zig zag? any icon/symbol I should look for in my stitches menu? stitch width and length?
    HOnestly , I have a serger my husband bought me for christmas but it terrifies me, I dont want to experiment now and ruin this beautiful dress. Thank u for your advice.
    nadya

    ReplyDelete
    Replies
    1. Serger would be the best option! Just practice on some scrap fabric. They are not that scary at all and it will give you the finish you seek. Plus, the process will go much faster because you can stitch and finish your seams in one step. :)
      If you prefer to use your sewing machine, look for the stretch stitch (a.k.a. lighting bolt stitch) or a 3-step zig-zag. A regular zig-zag stitch will work as well, as it will add elasticity to your seams.

      Delete
  3. Anonymous12:34 PM

    thank you! found a sitch called a knit stitch , will try that one and the serger as well on scrap fabric

    ReplyDelete

Proudly designed by | mlekoshi Playground |