A Day in the Life of a Print Job -- Part 3

Press checks for the instruction booklets started promptly at 10:00 a.m. today. This time there was nothing keeping me from attending... no snow days, schedule conflicts or delays of any sort... so I was a happy camper. :)

As you come in, the pressman usually has your press sheet up on the table ready to be checked over. They were able to get all 6 of my front & back covers plus 1 interior spread on one press sheet. Pretty impressive, if you ask me!

print-job-10

The first thing I do is look for registration issues. This is the pressman's lupe. I tried to get as close to it with my camera and see if you could actually see the dot pattern through the magnifying glass, but my photo didn't turn out as clear as I expected it. Oh well! But trust me, you can see each and every dot through that thing. Any registration issues will be clear & visible right away. Everything was in perfect registration. YAY! :)

print-job-11

Next, we compare the press sheet to the Sherpa proof to see if there are any color discrepancies. In this photo I am holding the Sherpa proof on my left hand while I point at a little bit of redness I noticed
in one small area of the press sheet. By the look on my pressman's face I'd say he probably thinks I'm crazy! LOL!

print-job-12

I check my signature red and lime green colors from the MODKID logo to make sure the color is accurate and consistent throughout and I also check for good skin tones and things like that. Pressman Kenny is at my side the entire time to answer questions or make quick color adjustments.

print-job-13

Oh, see those greenish-looking sheets on the lower right hand corner of this next photo? Those are the plates from which the press sheets are made. There is one for each process color, C=Cyan, M=Magenta, Y=Yellow and K=Black. All 4 of those together make up a 4-color print job like mine.

print-job-14

Here is a closer look at those plates...

print-job-15

My booklets always go on a 6-color press, like this Heidelberg Speedmaster because in addition to the 4 process colors, they get a Dull Aqueous Coating, which is like a varnish that is applied in-line and is actually considered a 5th color.

(Isn't this thing massive?)

print-job-16

When the press sheets come out of the machine, they have the coating already applied. We added the aqueous coating to minimize glare on the booklet when your are sewing and also to protect the pages from fingerprints, grease, water, etc.

print-job-17

Next up... trimming, folding and saddle-stitching. Stay tuned!

13 comments:

  1. I'm hooked. I love this series!

    And can't wait to get my hands on some of those doll patterns. :)

    hugs,
    Meli

    ReplyDelete
  2. I love going to see things being printed and going to factories to see things being made. Thanks for sharing!

    ReplyDelete
  3. I have always been impressed with the quality of your sewing booklets, now I'm even more impressed. :)

    ReplyDelete
  4. I am loving these posts! I work in marketing and have had the opportunity to go on a few visits to the printer and see the inner workings, but not to this detail.

    ReplyDelete
  5. Thanks for all the 'behind the scenes' peeks, it is so interesting! I am looking forward to the rest.

    ReplyDelete
  6. This is so very cool!!!

    ReplyDelete
  7. Annie8:33 AM

    Cool! This is my favorite episode so far. They get more & more interesting.

    I have several of your patterns and I must say that all the hard work, time, effort and attention to detail really shows through. Your patterns are not only flawless but they are a joy to look at, like collector's items. :)

    Annie

    ReplyDelete
  8. Thank you all for the lovely comments. So glad I'm not boring half the blogosphere with these posts. :)

    patty

    ReplyDelete
  9. I love "how it's made" type things! My aunt worked in a print shop of some kind when I was a kid but I never saw a procedures like what you are sharing. Thank you!

    ReplyDelete
  10. fleurlenfant.blogspot.com7:59 PM

    Not boring at all!!! I just love the behind the scenes look at what goes into your patterns. Thank you again for sharing ;)

    Andrea

    ReplyDelete
  11. I worked in the printing industry for many years and LOVED it!!! It always fascinated me and I still miss it!
    Thanks for the memories!
    mary

    ReplyDelete
  12. Anonymous4:33 PM

    Sooo ... welll ... I like those behind the scene thingemajigs .... just one more question:
    When will I be able to get my patterns?
    :p

    kind regards (funny expression) form Luxembourg
    the annoying Simone

    ReplyDelete
  13. Hey, are those Kodak printing plates? My husband is a scheduler for Kodak and they make them here in Columbus, GA! :)

    ReplyDelete

Proudly designed by | mlekoshi Playground |